Monday, May 18th, 2009 at
1:11 pm
How do I disable the DVD to my TV / VHS combo?
I have a combo TV and the DVD is dead. I want to continue using television, but it runs for about 5 seconds, then turns off because of the DVD is jammed up. So she has always done anytime a VHS tape was stuck in the past, but now he alwys expire after 5 seconds.
You can generally not disable the VHS part. But the most common problem is the belt is broken or gear involved in the mode switch (which is actually a gear mechanism) is not running due to a tree to get the belt back or replace it. Or more likely, you need to get this little tree back into the small screw gear which rotates the biggest gear on the bottom of the circuit board. That large changes in speed mode. And whenever the device is placed on the control mode to see if a tape has not been completely ejected. Thus, it moves things. If it moves and it is fortunate that the mode is right, he keeps the TV on. If he sees a jam band and close the unit down. Hope this helps. I fixed some of them and all you need is patience.
Read the rest of this entry
Thursday, March 12th, 2009 at
3:04 am
I have a VCR / DVD Combo reader and is connected to my TV. How do I connect my dvd recorder as the tv
Connect VCR / DVD Combo drive and DVD recorder to my TV also.
If you have only one connection to your TV, you should be able to buy a gluer. VCR / DVD player will go from one side, the DVD recorder can come in the other side. One line goes into your TV and you return A to B on what you want.
Read the rest of this entry
Friday, February 13th, 2009 at
7:29 am
How to configure a DVD / VCR combo to an old TV with 1 coaxial imput?
I have a DVD / VCR Combo (DVD player does not work) and a DVD drive working and a former TV model with a single coaxial input.
Usually you fasten your antenna or cable through the machine DVD on TV ... (inout cable to DVD .. DVD Release on television), then View DVD try channel 3 ....
Read the rest of this entry
Friday, January 16th, 2009 at
11:20 am
Can anyone help me find a DVD / VCR combo that is 16 inches wide?
I need find a DVD recorder VCR that will fit into the hole in my entertainment center. It's 16 "wide. Thank you!
Unfortunately, the standard width of A / V components is seventeen inches.
Read the rest of this entry
Wednesday, May 28th, 2008 at
11:15 am
How do I connect a VCR / DVD Combo on a DVD and TV?
I bought a DVD burner and I tunerless am trying to connect to my VCR / DVD Combo TV and recording from a VCR. I have cable but no decoder cable or any other box. I have an RF modulator. How can I connect all these together to be able to save?
Simple, leave VCR / DVD recorder plugged into the circuit just as it is ..... Do not touch .... Then attach your DVD recorder with video inputs .... connect the video outputs on the VCR ... See how easy that was.
Read the rest of this entry
Friday, May 16th, 2008 at
2:09 am
Thursday, March 27th, 2008 at
9:32 pm
Does anyone know the difference between the Panasonic DMR-EX95V and the Panasonic DMR-EX98V?
Set aside money that someone knows the differences between the Panasonic DMR-EX95V and the Panasonic DMR-EX98V as I'm not up with technology and not sure what they are being on most of the time, all I know is I want something that makes as much as possible and is fairly easy to understand.
The DMR-95V is interrupted and DMR-98V is the replacement. Not enough difference to agonize over the decision. If the upper 10% of the cost is not a new problem, avoid obsolescence of the old. Both contain the capacity of TNT, but I am not familiar with this technology if the new address without doubt some issues that the elder had.
Read the rest of this entry
